Search results
1 day ago · Xu et al. devised an elliptical fin-and-tube heat exchanger incorporating X-VGs (cross-shaped vortex generators) to enhance both hydraulic and heat performance, as shown in Figure 5. Their findings indicate that increasing the streamwise distance and the main flow angle leads to a reduction in thermal-hydraulic performance.
2 days ago · Design: Look for heat exchangers with well-engineered designs that minimise heat loss through streamlined flow paths and optimised thermal transfer surfaces. Operational Parameters : Understanding and optimising flow rates, temperature differentials, and pressure drops are critical to achieving peak efficiency.
5 days ago · Diamonds are used to identify hydraulic conditioning devices, such as filters, heat exchangers, and cooling devices. Arrows are used on exchangers to indicate the direction of the heat. For example, if the arrows point outwards, then the exchanger is a cooler.
2 days ago · Select a suitable type of shell and tube exchanger. Define design parameters such as - number of tube passes, tube size, shell ID etc. Heat exchanger calculations and modeling to get the output - outlet hot/cold fluid temperature, heat transfer rate, pressure drop on shell/tube sides etc.
- (76)
1 day ago · Accurate prediction of the impact of flow maldistribution on the thermo-hydraulic behavior of plate heat exchangers is important for thermal design and optimiza
1 day ago · Heat exchangers play a pivotal role in industrial processes, and their maintenance is crucial for saving costs, promoting energy efficiency, and performing daily business operations. However, maintaining this equipment can come with significant safety risks to employees and other tools or machinery in their vicinity if not cleaned properly and safely.
3 days ago · DESCRIPTION. Generally contains a layer of foam or paper embedded with a hydroscopic salt such as calcium chloride. Bacterial and viral filters ideally have filtration efficiency of >99.9% HME with humidification efficiency >30mg.H2O/L. connects to a standard 15mm connector on an endotracheal tube. METHOD OF INSERTION AND/OR USE.
